Europa B Evo Autoclave

Tecno-gaz - Classe B - 15 litres

Europa B Evo Autoclave

Tecno-gaz - Classe B - 15 litres

Code:
Brand:
Unit:
Availability:

4,425.90 £

(including VAT)

Price without VAT 3,627.79 £
info General information
assignment Technical information
work Standard equipment
list Compatible with
save_alt Downloads

General information

Product Description
Fractionated Vacuum: B type fractionated vacuum managed by a double phase vacuum pump to ensure complete evacuation of air.
Microprocessor System and Evaluation System Built in: All functions and controls are managed by an updated microprocessor electronic system.
System of integrated valuation: An electronic control ensures a self valuation and the management of all functions.
New electronic control: The control card is integrated in the board to allow temperature settings to be preset, automatic barometric alignment to take place, multifunction graphic display to work and carries the management availability for the integral P.I.D. system.
Safety Door: The door is equipped with three systems to ensure the operators safety: Dynamic, Electromagnetic, and Electronic. The door will only open when the internal pressure is zero, ensuring the operators safety.
6 Automatic cycles without operators: Six automatic sterilization cycles which do not need the operator to be present. All equipped with an anti-condensation function and automatic cut off.
3 Cycle tests for vacuum check: Europa B XP has 3 test cycles available: VACUUM TEST, for the air pockets evacuation
BOWIE &DICK TEST, for hollow-tools HELIX TEST.
Warranted drying: The combined vacuum and heat drying cycle ensures that the equipment is totally dry as required.
Stainless steel chamber: The T-PED certified stainless steel cylinder ensures the heat is uniformly dissipated.
Validating System: Prearranged validating system of the sterilization cycle.
Water tanks: A clean water tank and a dirty water tank ensure the best possible sterilization cycle and enhance the working life of your equipments
P.I.D. Regulation System
Special control to monitor the parameters of the sterilization cycle

Standard equipment

• Operating voltage: 230V-50/60 Hz
• External size mm: 510×590×390
• Weight Kg: 54
• Max absorbed power: 1.700 W
• Chamber size mm: Ø 245×320

• Thermal printer



Technical information

Sterilization cycles

121° C wrapped and unwrapped
• Exposed time: 18 min.
• Drying time: 17 min.
• Press. work min and max (relative bar): 1.04 ÷ 1.30
• Temperature work min and max: 121 ÷ 125

134° C wrapped and unwrapped
• Exposed time: 5 min.
• Drying time: 17 min.
• Press. work min and max (relative bar): 2.02 ÷ 2.38
• Temperature work min and max: 134 ÷ 138

134° C FLASH
• Exposed time: 4 min.
• Drying time: 2 min.
• Press. work min and max (relative bar): 2.02 ÷ 2.38
• Temperature work min and max: 134 ÷ 138

134° C PRION
• Exposed time: 20 min.
• Drying time: 17 min.
• Press. work min and max (relative bar): 2.02 ÷ 2.38
• Temperature work min and max: 134 ÷ 138

134° C HELIX/ BOWIE&DICK
• Exposed time: 3.5 min.
• Drying time: 4 min.
• Press. work min and max (relative bar): 2.02 ÷ 2.38
• Temperature work min and max: 134 ÷ 138

VACUUM
• Press. work min and max (relative bar): - 0.9

The pre-heating time and fractionation of the vacuum can vary depending on the conditions of the autoclave from 25 - 35 minutes that will add up with the times of the cycles shown in table. All sterilization cycles have 3 stages of vacuum.

Accessories
Similar products