Diatermo MB 200

mono-bipolar 200 Watt

Diatermo MB 200

mono-bipolar 200 Watt

General information | Technical information | Standard equipment | Compatible with | Downloads |
Code:
Brand: GIMAlink
Unit:
Availability:
heart_plus

1,442.78 £

(including VAT)
Price without VAT 1,182.61 £
info General information
assignment Technical information
work Standard equipment
list Compatible with
save_alt Downloads

General information

Diatermo MB200 is a HF electrosurgical unit suitable to effect middle monopolar or bipolar electrosurgery. The available waveforms and peak voltage value, as well as the accurate HF leakage current operation for polypectomy, TURP, intrauterine resections, endometriosis excision, etc.

The unit allows the accurate preset of the output power with as low as 1 Watt resolution and to perform coagulation with high crest factor current, to get an elevated thermal effect, as well as with low voltage low crest factor current, to get coagulation in absence of carbonization.

Ten different programs related to ten different operative conditions could be stored and easily recalled by the surgeon. The use of either split or normal neutral plates are allowed. A special electronic circuit (Skin Plate Electronic Control) continuously warns the plate to patient contact safety and unwanted short circuit in the connecting cable.

An over time warning (OVT) is provided to prevent excessive heating of the tissue around the surgical target due to current delivery time too much long.

Compatible with

• Adson forceps 12.1 cm - 1 mm point

• Autoclavable handle for 106, 108, 50D and 80D

• Ball electrode N° 17 - 7 cm

• Ball electrode N° 36 Ø 4mm - 15 cm - autoclavable

• Bayonet bipolar forceps 18 cm - 1 mm point

• Bayonet monopolar forceps - 20 cm

• Binner forceps - 18 cm - straight

• Bipolar cable for MB 120F, 200F, 200D, 250, 300D, 400D - US plug

• Bipolar cable for MB 122, 160, 200, 202

• Blade electrode N° 36 - 15 cm

• Blade electrode N°16 - 7 cm

• Cable for plates - 5 m

• Cable for rubber plates

• Curved bipolar forceps 18 cm - 1 mm round point

• Cushing forceps 15.9 cm - 1 mm point

• Electrode bend N° 23 - straight 4 mm - 10 cm

• Electrode bend N° 24 - straight 8 mm - 10 cm

• Electrode blade-straight n° 11 - disposable - sterile - 7cm

• Electrode brush - 50×50 mm

• Electrode hook N° 25 - angled 45° - 10 cm

• Electrode N° 10 ball point - straight

• Electrode n° 12 ball point Ø 4 mm - disposable - sterile - 7 cm

• Electrode N° 2 wire - angled 45° - 5 cm

• Electrode N° 21 wire - straight - 10 cm

• Electrode N° 26 wire 1mm - angled 45° - 10 cm

• Electrode N° 28 angled slip - knot - straight - 10 cm

• Electrode N° 29 ball point - angled 45° - 10 cm

• Electrode N° 3 bend - straight Ø 4 mm - 5 cm

• Electrode N° 30 ball point - straight - 10 cm

• Electrode n° 31 blade-straight - disposable - sterile - 15 cm

• Electrode n° 32 ball point Ø 5mm - disposable - sterile - 15 cm

• Electrode N° 4 bend - straight Ø 8 mm - 5 cm

• Electrode N° 5 hook - angled 45°

• Electrode N° 7 straight slip-knot - straight

• Electrode N° 8 angled slip-knot - straight

• Electrode N° 9 ball point - angled 45°

• Electrode needle n° 13 - disposable - sterile - 7cm

• Electrode needle n° 33 - disposable - sterile - 15 cm

• Electrode wire N° 22 - angled - 10 cm

• Electrodes N° 1 wire - straight - 5 cm

• Electrodes N° 10 ball point - straight

• Electrodes N° 27 straight slip-knot - straight - 10 cm

• Electrodes N° 6 wire 1 mm - angled 45°

• Gima single use Mb handle - sterile

• Jansen bayonet bipolar forceps 17.8 cm - 1 mm point

• Loop electrode n° 34 - disposable - sterile - 15 cm

• Loop electrode N° 51 15×8 mm - autoclavable

• Loop electrode N° 52 20×10 mm - autoclavable

• MB AUTOCLAVABLE HANDLE 100 times

• Mc- Pherson forceps 10,2 cm - 0.5 mm point

• METAL PLATE - without cable

• Metzenbaum monopolar scissors - curved - 18 cm

• Metzenbaum monopolar scissors - straight - 18 cm

• Microsurgery handle

• Monopolar scissors - 18 cm

• Needle electrode N° 35 - 15 cm

• Needle electrode N°15 - 7 cm

• New bipolar adaptor for MB 122, 160, 200, 202

• REM rubber plate 20 × 15cm - without cable (for 200,202,240,380)

• Semkin forceps 14 cm - 0.5 mm point

• Set 10 electrodes - 5 cm

• Set of 10 electrodes - 10 cm (From 101058 To 101067)

• Square loop electrode N° 50 10×8 mm - autoclavable

• Star autoclavable handle 30 times

• Straight bipolar forceps 18 cm - 1 mm point

• Straight forceps with irrigation - 18 cm - 1 mm point

• Straight monopolar forceps - 15 cm

Standard equipment

• MB two-button handle
• MB operative foot-switch (usable in alternative to handle)
• MB flat neutral metal plate with cable
• Kit 9 short standard electrodes, diam. 2.4. mm.
• Power cable 2 m



Technical information

• Minimum preselectable power 0 0
• Level step digital 1 1
• Maximum output power CUT (W) 200 250Ω
• Maximum output power CUT 90% (W) 200 250Ω
• Maximum output power CUT 80% (W) 200 250Ω
• Maximum output power CUT 70% (W) 200 250Ω
• Maximum output power BLEND (W) 120 200Ω
• Maximum output power COAG FORCED (W) 150 150Ω
• Maximum output power COAG SOFT (W) 90 100Ω
• Maximum output power BIPOLAR COAG (W) 100 100Ω
• Maximum output power BIPOLAR CUT (W) 120 250Ω

• Crest Factor CUT 1.5 1.5
• Crest Factor CUT 90% 1.6
• Crest Factor CUT 80% 1.7
• Crest Factor CUT 70% 1.8
• Crest Factor BLEND 2.1
• Crest Factor COAG FORCED 2.0
• Crest Factor COAG SOFT 1.7
• Crest Factor BIPOLAR CUT (W) 1.5
•Crest Factor BIPOLAR CUT (W) 1.5

• Working frequency 600 kHz
• Weight Kg 8
• Size LxHxD mm 360×150×265
• Selectable mains power(Vac) 115 -230
• Mains frequency (Hz) 50-60
• Fuses 230Vac (5×20) TIMED 2× 3.15A
• Fuses 115Vac (5×20) TIMED 2× 6.3A
• Power accuracy output warning system
• Split or not split patient plate allowed
•Electrical Class (EN60601 - 1) I CF
• MDD 93/42/EEC Class II b
• circuit F
• Duty cycle (action/pause) in seconds 10/30

Downloads

EU declaration
User manual
Accessories
Similar products